 |
|
Sign In
In Stock and ready to ship! Instructions here http://billet-works.com/build_instructions_-_tr1_tricopter As seen on our Youtube Channel at http://www.youtube.com/watch?v=-DvYhH5g3x0&list=UUNO5xbXCODX8LjK7uPeceOg&index=2&feature=plcp and http://www.youtube.com/watch?v=gHN-WqiYpks&list=UUNO5xbXCODX8LjK7uPeceOg&index=1&feature=plcp Also seen on our FB Page at http://www.facebook.com/Billet.Works Includes G10 Frame, Delrin Canopy, Skids, Rear Pivot Assembly, Servo Stand-offs, Stainless Hardware, and Fast Eddy Bearings (for the pivot). Board mounting locations slotted for use with KK or typical Multi Wii Boards. Here's a one stop shop for the components needed to outfit the TR1...based out of Fort Worth, TX and run by Chris Moon (my video pilot). He's currently putting together a TR1 accessory package so you will get everything you need with just one click!..and shipping is quick! www.ushobbyparts.com Requires: 3x 2205-2212 Motors (2205 if you build light, 2212 if you're after neck snapping performance) - 1050-1200 KV is my preferred standard for this airframe 3x ESC's (Turnigy Plush 20 Amp ESC's or similar) Flight Controller Board (the one in my videos is just the hobbyking.com V2.1 board) and necessary adapter cables 4ch Receiver (and your 2 stick transmitter) Bullet Connectors (if you dont want to wire solid) Hitec HS 85MG or similar with 3/4"-1" servo horn 3x 8" props with prop adapters for your motors 2200mah 3s lipos or similar 2x velcro battery straps E-mail a friend about this item. |
|||||||||
|
|
